Journal of Theoretical and Applied Mechanics

Alexandre de Macêdo Wahrhaftig, Reyolando Manoel Lopes Rebello da Fonseca Brasil, Thiago Bahia Groba, Lauro Miguel Lima Rocha, José Manoel Balthazar, Lázaro Sabas Marques Silva Cheles Nascimento

Journal of Theoretical and Applied Mechanics 2020;58(4):1023-1035

DOI: https://doi.org/10.15632/jtam-pl/126681

Abstract

Article (PDF)

Stats

ARTICLE

Mechanical properties and sound velocity of gold copper (AuCu) II superlattice: 3D molecular dynamic (MD) simulation

Mohammed Mahmoud Aish

Journal of Theoretical and Applied Mechanics 2020;58(4):901-909

DOI: https://doi.org/10.15632/jtam-pl/126389

Abstract

Article (PDF)

Stats

ARTICLE

Numerical investigation on train-induced environmental vibration in floating ladder tracks

Jabbar Ali Zakeri, Omid Ebrahimi-Gholami, Hassan Hassan Liravi, Golshan Satar-Boroujen

Journal of Theoretical and Applied Mechanics 2020;58(4):871-883

DOI: https://doi.org/10.15632/jtam-pl/126319

Abstract

Article (PDF)

Stats

ARTICLE

Experimental investigation on elevated water tanks with base isolation – response spectrum approach

Paul P. A. Vimal, Joseph D. J. Regin, Gowthami T. R. Jinu, Chembakaraman G. Chettiar

Journal of Theoretical and Applied Mechanics 2020;58(4):885-899

DOI: https://doi.org/10.15632/jtam-pl/125617

Abstract

Article (PDF)

Stats

ARTICLE

Modeling of dynamic growth of a micro-scaled void based on strain gradient elasto-plasticity

Xinbing Ma, Jinxing Liu, Jiadong Wang, Hao Pan

Journal of Theoretical and Applied Mechanics 2020;58(4):927-941

DOI: https://doi.org/10.15632/jtam-pl/124993

Abstract

Article (PDF)

Stats

ARTICLE

Timoshenko beam model for vibration analysis of composite steel-polymer concrete box beams

Beata Niesterowicz, Paweł Dunaj, Stefan Berczyński

Journal of Theoretical and Applied Mechanics 2020;58(3):799-810

DOI: https://doi.org/10.15632/jtam-pl/122389

Abstract

Article (PDF)

Stats

ARTICLE

Moving semi-infinite mode-III crack inside the semi-infinite elastic media

Palas Mandal

Journal of Theoretical and Applied Mechanics 2020;58(3):649-659

DOI: https://doi.org/10.15632/jtam-pl/117813

Abstract

Article (PDF)

Stats

ARTICLE

Dynamic characteristics study on the two-stage safety valve used on hydraulic support under impact loading

Guochao Zhao, Hui Wang, Yuning Song, Changshuai Zhang

Journal of Theoretical and Applied Mechanics 2020;58(3):623-635

DOI: https://doi.org/10.15632/jtam-pl/116576

Abstract

Article (PDF)

Stats

ARTICLE

Stability analysis of the single-layer dome in probabilistic description by the Monte Carlo method

Paweł Zabojszcza, Urszula Radoń

Journal of Theoretical and Applied Mechanics 2020;58(2):425-436

DOI: https://doi.org/10.15632/jtam-pl/118950

Abstract

Article (PDF)

Stats

ARTICLE

Topology optimization of structures with stress and additive manufacturing constraints

Grzegorz Fiuk, Mirosław Mrzygłód

Journal of Theoretical and Applied Mechanics 2020;58(2):459-468

DOI: https://doi.org/10.15632/jtam-pl/118899

Abstract

Article (PDF)

Stats

ARTICLE

Reliability analysis of shell truss structure by hybrid Monte Carlo method

Beata Potrzeszcz-Sut

Journal of Theoretical and Applied Mechanics 2020;58(2):469-482

DOI: https://doi.org/10.15632/jtam-pl/118886

Abstract

Article (PDF)

Stats

ARTICLE

A new nondeterministic method for optimal selection of master degrees of freedom for dynamic condensation based on evolutionary optimization

Waldemar Mucha

Journal of Theoretical and Applied Mechanics 2020;58(2):445-458

DOI: https://doi.org/10.15632/jtam-pl/118823

Abstract

Article (PDF)

Stats

ARTICLE

Adhesion of epoxy coatings with micrometer size fillers to steel substrate

Paulina Mayer, Anna Dmitruk, Marek Lubecki, Michał Stosiak

Journal of Theoretical and Applied Mechanics 2020;58(2):437-443

DOI: https://doi.org/10.15632/jtam-pl/118821

Abstract

Article (PDF)

Stats

ARTICLE

Impact of the wind load probability distribution and connection types on the reliability index of truss towers

Wojciech Mochocki, Paulina Obara, Urszula Radoń

Journal of Theoretical and Applied Mechanics 2020;58(2):403-414

DOI: https://doi.org/10.15632/jtam-pl/118525

Abstract

Article (PDF)

Stats

ARTICLE

Static and kinematic shakedown theorems in diffusion-induced plasticity

Michael Peigney

Journal of Theoretical and Applied Mechanics 2020;58(2):415-424

DOI: https://doi.org/10.15632/jtam-pl/118453

Abstract

Article (PDF)

Stats

ARTICLE

Nonlinear homogenization of heterogeneous periodic plates of Reissner-Mindlin type

Pruchnicki Erick

Journal of Theoretical and Applied Mechanics 2020;58(2):317-323

DOI: https://doi.org/10.15632/jtam-pl/115370

Abstract

Article (PDF)

Stats

Random eigenvibrations of beams with viscoelastic layers

Marcin Kamiński, Maciej Przychodzki, Magdalena Łasecka-Plura, Michał Guminiak, Agnieszka Lenartowicz

DOI: https://doi.org/10.15632/jtam-pl/194242

Abstract

Article (PDF)

Stats

ARTICLE

Prediction and Mitigation of Instability in Ultra Long Drilling Shaft Lining Structures Using the Cusp Catastrophe Model

Jimin Liu, Ruixue Pan, Hua Cheng, Haixu Fan

DOI: https://doi.org/10.15632/jtam-pl/193952

Abstract

Article (PDF)

Stats

eISSN:	2543-6309
ISSN:	1429-2955

Topic structures mechanics

Design and optimization of dynamic cable configuration device for intelligent cable retractable vehicle

The comparison of robust and reliability based design optimization

Analysis of the influence of geometrical imperfections on the equivalent load stabilizing roof truss with lateral bracing system

The probabilistic model for system reliability analysis of a steel plane and spatial trusses

Parametric dynamic analysis of tensegrity cable-strut domes

Elastic buckling of a rectangular sandwich plate with an individual functionally graded core

Analytical modelling and shape optimization of composite girder with adhesive bondline

Comparative analysis of structure performance of PDC cutter tooth surface and interface matching pair

Estimation of stress intensity factor for surface cracks in the firtree groove structure of turbine disk using pool-based active learning with Gaussian Process Regression

Bending of a sandwich beam with an individual functionally graded core

Dynamic buckling of thin-walled cylindrical shells under radial impact pressures randomly distributed in the circumferential direction

An energy method for predicting and suppressing the instability of a three-dimensional thermoacoustic coupling system with a micro-perforated plate

Study on stress characteristics of high-porosity coal gangue subgrade during filling process

Buckling and vibration of porous sigmoid functionally graded conical shells

Failure analysis and optimization design of suspension support holes for gearbox cases

Experimental and numerical analysis of bolted two plates using a developed shear theory

Study on constraint effect and creep crack initiation of plate containing elliptical embedded cracks

Analysis of out-of-plane free vibration of single damaged curved beam based on precise algorithm of structural mechanics

Implementation of a viscoelastic boundary condition to Yade – open source DEM software

Study on tensile fracture failure of a steel plate with a surface crack

Impact of material nonlinearity of dam-foundation rock system on seismic performance of concrete gravity dams

Study on the stress intensity factor of a compact specimen under the pre-compressed load condition

Analysis of progressive collapse of a super-long span latticed steel arch structure

A control strategy of a permanent magnet synchronous motor for an electric vehicle

A new concept and algorithm to transfer brittle and arbitrary load-slip curves into an effective shear resistance suitable for Eurocode 4

Design and validation of a single-jack variable Mach number nozzle in a cryogenic transonic wind tunnel

Force mechanism and conceptual design of reinforced concrete short beam without web reinforcement

Studies on the performance of impact resistant structure of hydraulic support in fully mechanized mining face under rock burst

Influence of bonding condition on mechanical performance of synthetic sports surfaces by FEM

Characteristics of pure Love mode SAW sensor with graphene interdigital transducer for biosensing applications

Study on progressive collapse of single-layer arch shell structure based on VUMAT stability constitutive model

Parametric analysis of the whole loading process of translation-torsion coupled vibration characteristics of the multi-layer bi-directional eccentric frame structure

Structural optimization on the design of an automobile engine intake pipe

Optimization of sealing parameters of double-sealing pipeline repair clamp

Study on characteristics of three-dimensional granular meso-reconstruction of coal gangue roadbed

Numerical investigation of static behavior of bolted joints

Surrogate-based optimization of the layup of a laminated composite wind turbine blade for an improved power coefficient

Collapse modes of concrete reinforced square bridge piers under vehicle collision

Free vibration analysis of FGM stepped nanostructures using nonlocal dynamic stiffness model

Free vibration of composite cylindrical shells with orthogonal stiffeners

A modified Fourier-Ritz method for free vibration of rectangular plates with elastic constrains

Fillet effect on the bending crashworthiness of thin-walled square tubes

Model considering residual stiffness and stiffness discontinuity of bolted joints

Orthotropic model of rolling bearing in modeling lathe spindle dynamics

A simplified elliptical function solution for coupled nonlinear vibration of multilayer graphene sheets

Influence of grouting pressure volatility on additional response of adjacent pile foundation in shield construction

Development of design solutions for electric delivery vehicles with a GVM of 4.25 t

Residual stress profile determination by the hole-drilling method with calibration coefficients obtained using FEM

Simulation and optimization of a new energy vehicle power battery pack structure

Numerical study on the dynamic response of a concrete filled steel tubular long column under axial impact by a rigid-body

Stress and load distribution analysis in bolt connection with modified thread profile under high temperature conditions

Determination of rheological model coefficients of pipeline composite material layers based on spectrum analysis and optimization

Design and simulation analysis of an integrated xyz micro-actuator for controlling displacement of a scanning probe

Crashworthiness and comparative analysis of polygonal single and bi-tubular structures under axial loading – experiments and FE modelling

Modeling of a Bingham model of a magnetorheological damper considering stochastic uncertainties in their geometric variables

Finite element formulation and free vibration analyses of rotating functionally graded blades

Resonance of a rotary machine support beam considering geometric stiffness

Mechanical properties and sound velocity of gold copper (AuCu) II superlattice: 3D molecular dynamic (MD) simulation

Numerical investigation on train-induced environmental vibration in floating ladder tracks

Experimental investigation on elevated water tanks with base isolation – response spectrum approach

Modeling of dynamic growth of a micro-scaled void based on strain gradient elasto-plasticity

Timoshenko beam model for vibration analysis of composite steel-polymer concrete box beams

Moving semi-infinite mode-III crack inside the semi-infinite elastic media

Dynamic characteristics study on the two-stage safety valve used on hydraulic support under impact loading

Stability analysis of the single-layer dome in probabilistic description by the Monte Carlo method

Topology optimization of structures with stress and additive manufacturing constraints

Reliability analysis of shell truss structure by hybrid Monte Carlo method

A new nondeterministic method for optimal selection of master degrees of freedom for dynamic condensation based on evolutionary optimization

Adhesion of epoxy coatings with micrometer size fillers to steel substrate

Impact of the wind load probability distribution and connection types on the reliability index of truss towers

Static and kinematic shakedown theorems in diffusion-induced plasticity

Nonlinear homogenization of heterogeneous periodic plates of Reissner-Mindlin type

Random eigenvibrations of beams with viscoelastic layers

Prediction and Mitigation of Instability in Ultra Long Drilling Shaft Lining Structures Using the Cusp Catastrophe Model