Home
Articles
About the Journal
Instructions for Authors
Reviewers
Login

Topic computational mechanics

 
ARTICLE
 

The use of a genetic algorithm in the process of optimizing the shape of a three-dimensional periodic beam
Lukasz Dolinski, Arkadiusz Zak, Wiktor Waszkowiak, Pawel Kowalski, Jacek Szkopek
Journal of Theoretical and Applied Mechanics 2024;62(3):601-613
DOI: https://doi.org/10.15632/jtam-pl/191178
 
ARTICLE
 

Towards the prediction of plaque onset and growth in carotid arteries
Jaskaran Singh, Katia Capellini, Benigno Marco Fanni, Alessandro Mariotti, Maria Vittoria Salvetti, Simona Celi
Journal of Theoretical and Applied Mechanics 2024;62(3):631-635
DOI: https://doi.org/10.15632/jtam-pl/191182
 
ARTICLE
 

Numerical investigation of the asymptotic behavior of tape springs
Michele Coppedè, Roberto Paroni, Marco Picchi Scardaoni
Journal of Theoretical and Applied Mechanics 2024;62(3):535-545
DOI: https://doi.org/10.15632/jtam-pl/189814
 
ARTICLE
 

Feed-forward artificial neural network as surrogate model to predict lift and drag coefficient of NACA airfoil and searching of maximum lift-to-drag ratio
Rafał Kieszek, Maciej Majcher, Borys Syta, Adam Kozakiewicz
Journal of Theoretical and Applied Mechanics 2024;62(3):521-534
DOI: https://doi.org/10.15632/jtam-pl/189805
 
ARTICLE
 

An approximate analytical solution of a 4-DOF variable-length pendulum model
Godiya Yakubu, Paweł Olejnik
Journal of Theoretical and Applied Mechanics 2024;62(3):461-476
DOI: https://doi.org/10.15632/jtam-pl/188882
 
ARTICLE
 

Determination of Chaboche and Bouc-Wen parameters for quenched and tempered steel
Ciro Santus, Lorenzo Romanelli, Tommaso Grossi, Paolo Neri
Journal of Theoretical and Applied Mechanics 2024;62(3):507-519
DOI: https://doi.org/10.15632/jtam-pl/188526
 
ARTICLE
 

Predicting the trajectory of a spinning ping pong ball during flight using three-dimensional coordinates
Xinyue Li
Journal of Theoretical and Applied Mechanics 2024;62(3):561-571
DOI: https://doi.org/10.15632/jtam-pl/188373
 
ARTICLE
 

Transient vibration of a fractional viscoelastic cantilever beam with an eccentric mass element at the end
Jan Freundlich
Journal of Theoretical and Applied Mechanics 2024;62(2):421-434
DOI: https://doi.org/10.15632/jtam-pl/186899
 
ARTICLE
 

Error measures and solution artifacts of the harmonic balance method on the example of the softening Duffing oscillator
Hannes Dänschel, Lukas Lentz, Utz von Wagner
Journal of Theoretical and Applied Mechanics 2024;62(2):435-455
DOI: https://doi.org/10.15632/jtam-pl/186718
 
ARTICLE
 

Identification of nickel-titanium alloy material model parameters based on experimental research
Jonasz Hartwich, Sebastian Sławski, Sławomir Duda
Journal of Theoretical and Applied Mechanics 2024;62(2):415-419
DOI: https://doi.org/10.15632/jtam-pl/186510
 
ARTICLE
 

Numerical modelling of the laser high-temperature hyperthermia using the dual-phase lag equation
Mikołaj Stryczyński, Ewa Majchrzak
Journal of Theoretical and Applied Mechanics 2024;62(2):389-401
DOI: https://doi.org/10.15632/jtam-pl/186178
 
ARTICLE
 

Study of a horizontal seat suspension with a model of the seated human body and energy recovery braking subsystem
Igor Maciejewski, Sebastian Pecolt, Andrzej Błazejewski, Bartosz Jereczek, Tomasz Krzyzynski
Journal of Theoretical and Applied Mechanics 2024;62(2):321-335
DOI: https://doi.org/10.15632/jtam-pl/186041
 
ARTICLE
 

The numerical methods for solving of the one-dimensional anomalous reaction-diffusion equation
Marek Błasik
Journal of Theoretical and Applied Mechanics 2024;62(2):365-376
DOI: https://doi.org/10.15632/jtam-pl/185888
 
ARTICLE
 

Internal heat sources in large strain thermo-elasto-plasticity – theory and finite element simulations
Balbina Wcisło, Marzena Mucha, Jerzy Pamin
Journal of Theoretical and Applied Mechanics 2024;62(2):293-306
DOI: https://doi.org/10.15632/jtam-pl/185614
 
ARTICLE
 

Higher order numerical homogenization in modeling of asphalt concrete
Marek Klimczak, Marta Oleksy
Journal of Theoretical and Applied Mechanics 2024;62(2):351-364
DOI: https://doi.org/10.15632/jtam-pl/185459
 
ARTICLE
 

Heat transfer in a thin metal film subjected to the ultra-short laser pulse modeled by a nonlinear two-temperature model
Jolanta Dziatkiewicz, Ewa Majchrzak
Journal of Theoretical and Applied Mechanics 2024;62(2):403-413
DOI: https://doi.org/10.15632/jtam-pl/185352
 
ARTICLE
 

Material discontinuity problems solved by a meshless method based on variably scaled discontinuous radial functions
Artur Krowiak, Jordan Podgórski
Journal of Theoretical and Applied Mechanics 2024;62(2):241-251
DOI: https://doi.org/10.15632/jtam-pl/185323
 
ARTICLE
 

Analysis of the influence of geometrical imperfections on the equivalent load stabilizing roof truss with lateral bracing system
Marcin Seweryn Krajewski
Journal of Theoretical and Applied Mechanics 2024;62(2):231-240
DOI: https://doi.org/10.15632/jtam-pl/185163
 
ARTICLE
 

Tuning of the equilibrated residual method for applications in general, direct and inverse piezoelectricity
Grzegorz Zboiński
Journal of Theoretical and Applied Mechanics 2024;62(2):219-230
DOI: https://doi.org/10.15632/jtam-pl/184626
 
ARTICLE
 

Dynamic response of a guy line of a guyed tower to stochastic wind excitation: 3D non-linear small-sag cable model
Hanna Weber, Anna Jabłonka, Radosław Iwankiewicz
Journal of Theoretical and Applied Mechanics 2024;62(2):307-319
DOI: https://doi.org/10.15632/jtam-pl/184322
 
ARTICLE
 

The probabilistic model for system reliability analysis of a steel plane and spatial trusses
Katarzyna Kubicka
Journal of Theoretical and Applied Mechanics 2024;62(2):269-278
DOI: https://doi.org/10.15632/jtam-pl/184262
 
ARTICLE
 

Cryopreservation analysis considering degree of crystallisation using fuzzy arithmetic
Alicja Piasecka-Belkhayat, Anna Skorupa
Journal of Theoretical and Applied Mechanics 2024;62(2):207-218
DOI: https://doi.org/10.15632/jtam-pl/183697
 
ARTICLE
 

Ability of localizing gradient damage to determine size effect in concrete beams
Adam Wosatko, Jerzy Pamin, Andrzej Winnicki
Journal of Theoretical and Applied Mechanics 2024;62(2):193-206
DOI: https://doi.org/10.15632/jtam-pl/183493
 
ARTICLE
 

Bending of a sandwich beam with an individual functionally graded core
Krzysztof Magnucki, Krzysztof Sowiński
Journal of Theoretical and Applied Mechanics 2024;62(1):3-17
DOI: https://doi.org/10.15632/jtam-pl/174698
 
ARTICLE
 

Three-dimensional modelling and parameter identification of the seated human body exposed to random vibration
Igor Maciejewski, Andrzej Błażejewski, Sebastian Pecolt, Tomasz Krzyzynski, Piotr Zaporski
Journal of Theoretical and Applied Mechanics 2023;61(4):833-845
DOI: https://doi.org/10.15632/jtam-pl/173036
 
ARTICLE
 

Parametrization of the main rotor and working environment for different flight conditions – Computational Fluid Dynamics analysis as an application for multidisciplinary optimization
Jakub Kocjan, Stanisław Kachel, Robert Rogólski
Journal of Theoretical and Applied Mechanics 2023;61(4):793-805
DOI: https://doi.org/10.15632/jtam-pl/171748
 
ARTICLE
 

Mechanical performance of asphalt pavement with orthotropic unbound granular sub-base under vehicle load
Yuanyuan Gao, Nkosilathi Lovewell Hlupo, Quan Qian, Hongtao Jiang
Journal of Theoretical and Applied Mechanics 2023;61(4):715-728
DOI: https://doi.org/10.15632/jtam-pl/170854
 
ARTICLE
 

Numerical study of the effects of prosthesis foot asymmetry on energy characters and roll-over characteristics
Meijiao Jiang, Junxia Zhang
Journal of Theoretical and Applied Mechanics 2023;61(4):687-700
DOI: https://doi.org/10.15632/jtam-pl/170243
 
ARTICLE
 

Study on stress characteristics of high-porosity coal gangue subgrade during filling process
Bing Hui, Yingxin Hui, Xu Zhang, Wenjun Zhang, Sheng Yan, Guangyu Men
Journal of Theoretical and Applied Mechanics 2023;61(3):625-641
DOI: https://doi.org/10.15632/jtam-pl/168989
 
ARTICLE
 

On mitigation of oscillations of a mechanical system with two degrees of freedom in the vicinity of external resonances
Volodymyr Puzyrov, Nataliya Losyeva, Nina Savchenko
Journal of Theoretical and Applied Mechanics 2023;61(3):613-624
DOI: https://doi.org/10.15632/jtam-pl/168601
 
ARTICLE
 

An unsteady vehicle-road coupling dynamic response of a multi-layer plate on a viscoelastic half-space foundation
Shao-Qi Li, Zhan-You Yan, Yong-Chang Cui, Xue-Ke Hou, Zi-Jun Wang
Journal of Theoretical and Applied Mechanics 2023;61(3):521-531
DOI: https://doi.org/10.15632/jtam-pl/166652
 
ARTICLE
 

Experimental and numerical analysis of bolted two plates using a developed shear theory
Kürşat TANRIVER, Mustafa AY
Journal of Theoretical and Applied Mechanics 2023;61(3):509-520
DOI: https://doi.org/10.15632/jtam-pl/166533
 
ARTICLE
 

Sensitivity to Gauss quadrature of isogeometric boundary element method for 2D potential problems
Ahlem Alia, Hasna Ben Said
Journal of Theoretical and Applied Mechanics 2023;61(3):585-597
DOI: https://doi.org/10.15632/jtam-pl/166466
 
ARTICLE
 

Determination of contact pressure distribution on frictionless rough surfaces using an optimisation approach: a one-dimensional study
Milagros Noemi Quintana Castillo, Marco Antonio Luersen, Francisco José Profito
Journal of Theoretical and Applied Mechanics 2023;61(3):573-583
DOI: https://doi.org/10.15632/jtam-pl/166461
 
ARTICLE
 

Robust generation method of a signed distance function for preprocessing of cartesian-grid-based CFD
Yuki Takeda, Kazuyuki Ueno, Yuta Takahashi, Karin Matsubara
Journal of Theoretical and Applied Mechanics 2023;61(3):453-463
DOI: https://doi.org/10.15632/jtam-pl/165954
 
ARTICLE
 

Establishment of constitutive model and dynamic parameter analysis of rubber conveyor belt
Hongyue Chen, Siyuan Liu
Journal of Theoretical and Applied Mechanics 2023;61(2):365-378
DOI: https://doi.org/10.15632/jtam-pl/163246
 
ARTICLE
 

Implementation of a viscoelastic boundary condition to Yade – open source DEM software
Karol Brzeziński, Artur Zbiciak, Anton Gladky
Journal of Theoretical and Applied Mechanics 2023;61(2):355-364
DOI: https://doi.org/10.15632/jtam-pl/163053
 
ARTICLE
 

Study on tensile fracture failure of a steel plate with a surface crack
Zhewen Chong, Jing Tao, Yuehui Xie, Dongrong Wu, Tao Li
Journal of Theoretical and Applied Mechanics 2023;61(2):343-354
DOI: https://doi.org/10.15632/jtam-pl/162991
 
ARTICLE
 

A fully-coupled three-dimensional fluid-structure interaction study on the externally-pressurized collapsible tube and the internal flow
Sen Zhang, HaoFei Liu
Journal of Theoretical and Applied Mechanics 2023;61(2):395-406
DOI: https://doi.org/10.15632/jtam-pl/161686
 
ARTICLE
 

Predictions of fracture resistance of spruce wood under mixed mode loading using non-local fracture theory and numerical modelling
Marek Romanowicz
Journal of Theoretical and Applied Mechanics 2023;61(1):147-162
DOI: https://doi.org/10.15632/jtam-pl/158823
 
ARTICLE
 

Research on time-varying reliability of wind power gearbox with failure correlation
Mingliang Zheng
Journal of Theoretical and Applied Mechanics 2023;61(1):119-127
DOI: https://doi.org/10.15632/jtam-pl/158008
 
ARTICLE
 

Impact of material nonlinearity of dam-foundation rock system on seismic performance of concrete gravity dams
Djamel Ouzandja, Mokhtar Messaad, Amina Tahar Berrabah, Mohamed Belhrizi
Journal of Theoretical and Applied Mechanics 2023;61(1):49-63
DOI: https://doi.org/10.15632/jtam-pl/157571
 
ARTICLE
 

Biomechanical criterion of dynamic stability based on ZMP formula and Flash-Hogan principle of minimum jerk
Grzegorz Ilewicz, Jerzy Mrozowski, Jan Awrejcewicz, Bartłomiej Zagrodny, Michał Ludwicki
Journal of Theoretical and Applied Mechanics 2023;61(1):3-9
DOI: https://doi.org/10.15632/jtam-pl/157011
 
ARTICLE
 

A control strategy of a permanent magnet synchronous motor for an electric vehicle
Jianxin Xie, Zimeng Liu
Journal of Theoretical and Applied Mechanics 2022;60(4):673-685
DOI: https://doi.org/10.15632/jtam-pl/156181
 
ARTICLE
 

Comparison of long time simulation of Hamilton and Lagrange geometry dynamical models of a multibody system
Long Bai, Xinsheng Ge, Lili Xia
Journal of Theoretical and Applied Mechanics 2022;60(4):687-704
DOI: https://doi.org/10.15632/jtam-pl/156163
 
ARTICLE
 

Design and validation of a single-jack variable Mach number nozzle in a cryogenic transonic wind tunnel
Chengguo Yu, Zhili Zhang, Ning Wang, Xutao Nie, Qiang Peng, Zhenhua Chen
Journal of Theoretical and Applied Mechanics 2022;60(4):719-732
DOI: https://doi.org/10.15632/jtam-pl/155983
 
ARTICLE
 

Force mechanism and conceptual design of reinforced concrete short beam without web reinforcement
Yi-Jun Chen, Hu-Zhi Zhang, Bei-Rong Lu, Yao-Sen Huang
Journal of Theoretical and Applied Mechanics 2022;60(4):659-671
DOI: https://doi.org/10.15632/jtam-pl/155045
 
ARTICLE
 

Fracture analysis for viscoelastic creep using peridynamic formulation
Muhammad Azim Azizi, Mohd Zakiyuddin Mohd Zahari, Sharafiz Abdul Rahim, Muhamad Amin Azman
Journal of Theoretical and Applied Mechanics 2022;60(4):579-591
DOI: https://doi.org/10.15632/jtam-pl/152712
 
ARTICLE
 

Analysis of a nonlinear tuned mass damper by using the multi-scale method
Junfeng Liu, Ji Yao, Kun Huang, Qing Zhang, Li Ze
Journal of Theoretical and Applied Mechanics 2022;60(3):463-477
DOI: https://doi.org/10.15632/jtam-pl/151012
 
ARTICLE
 

Optimization of sealing parameters of double-sealing pipeline repair clamp
Bingjie Zhao, Shuli Zhang, Qijun Gao, Canliang Miao, Tongyu Wang
Journal of Theoretical and Applied Mechanics 2022;60(3):333-346
DOI: https://doi.org/10.15632/jtam-pl/150679
 
ARTICLE
 

CFD-predicted rotordynamic characteristics of a high temperature sodium liquid seal
Tong Wang, Pingwei Chen, Wensheng Ma, Guangbin Yu
Journal of Theoretical and Applied Mechanics 2022;60(3):347-360
DOI: https://doi.org/10.15632/jtam-pl/150588
 
ARTICLE
 

Study on characteristics of three-dimensional granular meso-reconstruction of coal gangue roadbed
Xiang-Xi Fan, Bing Hui, Shi-Jie Ma, Jian-Cun Fu, Wen-Jun Zhang, Ling-Xiao Meng, Zhi Sun
Journal of Theoretical and Applied Mechanics 2022;60(3):361-374
DOI: https://doi.org/10.15632/jtam-pl/150491
 
ARTICLE
 

Surrogate-based optimization of the layup of a laminated composite wind turbine blade for an improved power coefficient
Danilo Gomes Dellaroza, Claudio Tavares da Silva, Marco Antonio Luersen
Journal of Theoretical and Applied Mechanics 2022;60(3):395-407
DOI: https://doi.org/10.15632/jtam-pl/150299
 
ARTICLE
 

Free vibration analysis of FGM stepped nanostructures using nonlocal dynamic stiffness model
Tran Van Lien, Ngo Trong Duc, Tran Binh Dinh, Pham Tuan Dat
Journal of Theoretical and Applied Mechanics 2022;60(2):279-292
DOI: https://doi.org/10.15632/jtam-pl/149175
 
ARTICLE
 

Computational prediction of the resistance of the the floatplane at various trim angles
Aries Sulisetyono, Ihsan Fadhlurrohman, Baharudin Ali, Achmad Zubaydi
Journal of Theoretical and Applied Mechanics 2022;60(2):267-278
DOI: https://doi.org/10.15632/jtam-pl/148053
 
ARTICLE
 

Orthotropic model of rolling bearing in modeling lathe spindle dynamics
Jan Tomaszewski, Paweł Dunaj, Bartosz Powałka, Marcin Jasiewicz
Journal of Theoretical and Applied Mechanics 2022;60(1):17-31
DOI: https://doi.org/10.15632/jtam-pl/143305
 
ARTICLE
 

A simplified elliptical function solution for coupled nonlinear vibration of multilayer graphene sheets
G. Venkatraman, D. Suji
Journal of Theoretical and Applied Mechanics 2022;60(1):3-16
DOI: https://doi.org/10.15632/jtam-pl/143297
 
ARTICLE
 

Simulation and optimization of a new energy vehicle power battery pack structure
Guanqiang Ruan, Changqing Yu, Xing Hu, Jing Hua
Journal of Theoretical and Applied Mechanics 2021;59(4):565-578
DOI: https://doi.org/10.15632/jtam-pl/141503
 
ARTICLE
 

Cause investigation of metro corrugation in vehicle braking section of track
Zhiqiang WANG, Zhenyu Lei
Journal of Theoretical and Applied Mechanics 2021;59(4):637-647
DOI: https://doi.org/10.15632/jtam-pl/141447
 
ARTICLE
 

Numerical study on the dynamic response of a concrete filled steel tubular long column under axial impact by a rigid-body
Han QI, Shuohui CHEN, Jianlei ZOU, Huidi ZHANG, Mengsha LIU, Jinsan JU, Xiuxing SANG
Journal of Theoretical and Applied Mechanics 2021;59(4):551-563
DOI: https://doi.org/10.15632/jtam-pl/141308
 
ARTICLE
 

Effects of U-shaped two-step throttling groove parameters on cavitation erosion characteristics
Wenhua Jia, Yanyan Liu, Chenbo Yin, Guo Li, Dasheng Zhu, Shen Ding
Journal of Theoretical and Applied Mechanics 2021;59(4):529-538
DOI: https://doi.org/10.15632/jtam-pl/141261
 
ARTICLE
 

Stress and load distribution analysis in bolt connection with modified thread profile under high temperature conditions
Liange He, Bin Zhang, Caidong Guo, Wenjun Shi
Journal of Theoretical and Applied Mechanics 2021;59(3):469-480
DOI: https://doi.org/10.15632/jtam-pl/140220
 
ARTICLE
 

Numerical investigation of impact of non-spherical particles with spin and multi-point contact
Xindong Xu, Kuahai Yu, Shile Yao, Shihong Xin, Zhufeng Yue, Lei Li
Journal of Theoretical and Applied Mechanics 2021;59(3):431-441
DOI: https://doi.org/10.15632/jtam-pl/138727
 
ARTICLE
 

Numerical study of an unsteady non-premixed flame in a porous medium based on the thermal equilibrium model
Watit Pakdee, Thammasathit Sakkarangkoon
Journal of Theoretical and Applied Mechanics 2021;59(3):401-412
DOI: https://doi.org/10.15632/jtam-pl/136838
 
ARTICLE
 

Investigating the thermal and structural responses in hard-facing application with the GTAW process
Atilla Savaş
Journal of Theoretical and Applied Mechanics 2021;59(3):343-353
DOI: https://doi.org/10.15632/jtam-pl/136210
 
ARTICLE
 

Research on chaotic features of a flow field over a plunging airfoil based on dynamic mode decomposition
Yuhang Qi, Wenqing Yang, Yue Wang, Bifeng Song
Journal of Theoretical and Applied Mechanics 2021;59(2):293-305
DOI: https://doi.org/10.15632/jtam-pl/134803
 
ARTICLE
 

Study of calculation method of pure mode II stress intensity factor of fine-grained concrete using different numerical models
Changlin Zhou, Bo Peng, An Deng, Xiaofeng Gao, Yaojia Li, Lei Zhou, Zheming Zhu
Journal of Theoretical and Applied Mechanics 2021;59(2):251-264
DOI: https://doi.org/10.15632/jtam-pl/133519
 
ARTICLE
 

Distribution of crack-tip stresses during fatigue loading with an overload event: role of initial crack-tip shape, plastic compressibility and material softening
Satyabrat Pandey, Debashis Khan, Intaf Alam
Journal of Theoretical and Applied Mechanics 2021;59(2):239-250
DOI: https://doi.org/10.15632/jtam-pl/133177
 
ARTICLE
 

Liquid bridge in slit pore geometry
Junhui Hu, Mengjiao Wu, Kezhao Bai, Li Yang
Journal of Theoretical and Applied Mechanics 2021;59(1):135-142
DOI: https://doi.org/10.15632/jtam-pl/130454
 
ARTICLE
 

Consideration of the uncertainty in the dimensioning of a gearbox of a wind turbine
Hassen Trabelsi, Amir Guizani, Maher Barkallah, Moncef Hammadi, Ayman Hadrich, Mohamed Haddar
Journal of Theoretical and Applied Mechanics 2021;59(1):67-79
DOI: https://doi.org/10.15632/jtam-pl/128854
 
ARTICLE
 

Modeling of a Bingham model of a magnetorheological damper considering stochastic uncertainties in their geometric variables
Ke Chen, Xiaopeng Yu, Haishuo Wang, Hongmei Zheng, Guojun Zhang, Rui Wu
Journal of Theoretical and Applied Mechanics 2021;59(1):53-65
DOI: https://doi.org/10.15632/jtam-pl/128811
 
ARTICLE
 

Finite element formulation and free vibration analyses of rotating functionally graded blades
Elif Demirsoy Karahan, Özge Özdemir
Journal of Theoretical and Applied Mechanics 2021;59(1):3-15
DOI: https://doi.org/10.15632/jtam-pl/127537
 
ARTICLE
 

Resonance of a rotary machine support beam considering geometric stiffness
Alexandre de Macêdo Wahrhaftig, Reyolando Manoel Lopes Rebello da Fonseca Brasil, Thiago Bahia Groba, Lauro Miguel Lima Rocha, José Manoel Balthazar, Lázaro Sabas Marques Silva Cheles Nascimento
Journal of Theoretical and Applied Mechanics 2020;58(4):1023-1035
DOI: https://doi.org/10.15632/jtam-pl/126681
 
ARTICLE
 

Mechanical properties and sound velocity of gold copper (AuCu) II superlattice: 3D molecular dynamic (MD) simulation
Mohammed Mahmoud Aish
Journal of Theoretical and Applied Mechanics 2020;58(4):901-909
DOI: https://doi.org/10.15632/jtam-pl/126389
 
ARTICLE
 

Numerical and experimental investigation on nonlinear dynamic characteristics of planetary gear train
Jianwu Zhang, Han Guo, Haisheng Yu, Tong Zhang
Journal of Theoretical and Applied Mechanics 2020;58(4):1009-1022
DOI: https://doi.org/10.15632/jtam-pl/125572
 
ARTICLE
 

Timoshenko beam model for vibration analysis of composite steel-polymer concrete box beams
Beata Niesterowicz, Paweł Dunaj, Stefan Berczyński
Journal of Theoretical and Applied Mechanics 2020;58(3):799-810
DOI: https://doi.org/10.15632/jtam-pl/122389
 
ARTICLE
 

Analysis of co-flow jet effects on airfoil at moderate Reynolds numbers
Amir Khoshnevis, Shima Yazdani, Erfan Saimipour
Journal of Theoretical and Applied Mechanics 2020;58(3):685-695
DOI: https://doi.org/10.15632/jtam-pl/122266
 
ARTICLE
 

Three-point bending of an expanded-tapered beam with consideration of the shear effect
Krzysztof Magnucki, Jerzy Lewiński, Ewa Magnucka-Blandzi, Hanna Stawecka
Journal of Theoretical and Applied Mechanics 2020;58(3):661-672
DOI: https://doi.org/10.15632/jtam-pl/122203
 
ARTICLE
 

Multiobjective global optimization of mechanical systems with cracks
Witold Beluch, Adam Długosz
Journal of Theoretical and Applied Mechanics 2020;58(2):553-564
DOI: https://doi.org/10.15632/jtam-pl/119092
 
ARTICLE
 

Simulation of motion of a mobile robot on uneven terrain
Przemysław Grzegorz Sperzyński, Jacek Bałchanowski, Antoni Gronowicz
Journal of Theoretical and Applied Mechanics 2020;58(2):541-552
DOI: https://doi.org/10.15632/jtam-pl/119062
 
ARTICLE
 

Seismic ground response analyses at an international airport in northern Italy by using a stochastic-based
Francesca Bozzoni, Ali Güney Ozcebe, Andrea Balia, Carlo Giovanni Lai, Barbara Borzi, Roberto Nascimbene, Lucia Ippoliti, Simona Berardi, Marco Trombetti, Claudio Moroni
Journal of Theoretical and Applied Mechanics 2020;58(2):499-511
DOI: https://doi.org/10.15632/jtam-pl/119017
 
ARTICLE
 

Stability analysis of the single-layer dome in probabilistic description by the Monte Carlo method
Paweł Zabojszcza, Urszula Radoń
Journal of Theoretical and Applied Mechanics 2020;58(2):425-436
DOI: https://doi.org/10.15632/jtam-pl/118950
 
ARTICLE
 

Impact of the size of the sensor part on sensor-actuator efficiency
Roman Trojanowski, Jerzy Wiciak
Journal of Theoretical and Applied Mechanics 2020;58(2):391-401
DOI: https://doi.org/10.15632/jtam-pl/118948
 
ARTICLE
 

Topology optimization of structures with stress and additive manufacturing constraints
Grzegorz Fiuk, Mirosław Mrzygłód
Journal of Theoretical and Applied Mechanics 2020;58(2):459-468
DOI: https://doi.org/10.15632/jtam-pl/118899
 
ARTICLE
 

Reliability analysis of shell truss structure by hybrid Monte Carlo method
Beata Potrzeszcz-Sut
Journal of Theoretical and Applied Mechanics 2020;58(2):469-482
DOI: https://doi.org/10.15632/jtam-pl/118886
 
ARTICLE
 

A new nondeterministic method for optimal selection of master degrees of freedom for dynamic condensation based on evolutionary optimization
Waldemar Mucha
Journal of Theoretical and Applied Mechanics 2020;58(2):445-458
DOI: https://doi.org/10.15632/jtam-pl/118823
 
ARTICLE
 

Impact of the wind load probability distribution and connection types on the reliability index of truss towers
Wojciech Mochocki, Paulina Obara, Urszula Radoń
Journal of Theoretical and Applied Mechanics 2020;58(2):403-414
DOI: https://doi.org/10.15632/jtam-pl/118525
 
ARTICLE
 

Methodology of integrated modeling of high-temperature steel processing in the aspect of supporting the design of new technologies
Marcin Hojny, Mirosław Głowacki
Journal of Theoretical and Applied Mechanics 2020;58(2):361-371
DOI: https://doi.org/10.15632/jtam-pl/118312
 
ARTICLE
 

Avoidance of artifacts in harmonic balance solutions for nonlinear dynamical systems
Lukas Lentz, Utz von Wagner
Journal of Theoretical and Applied Mechanics 2020;58(2):307-316
DOI: https://doi.org/10.15632/jtam-pl/118161
 
ARTICLE
 

ANN model of stress-strain relationship for aluminium sponge in uniaxial compression
Marek Dudzik, Anna Małgorzata Stręk
Journal of Theoretical and Applied Mechanics 2020;58(2):385-390
DOI: https://doi.org/10.15632/jtam-pl/116804
 
ARTICLE
 

Evolutionary identification of microstructure parameters in the thermoelastic porous material
Adam Długosz, Tomasz Schlieter
Journal of Theoretical and Applied Mechanics 2020;58(2):373-384
DOI: https://doi.org/10.15632/jtam-pl/116802
 
ARTICLE
 

Design and simulation of a mobile platform with a semi-active suspension for uneven terrain
Michał Olinski, Kacper Cholewa
Journal of Theoretical and Applied Mechanics 2024;62(2):279-292
DOI: https://doi.org/10.15632/jtam-pl/184231
 
ARTICLE
 

Estimating equibiaxial stress-strain relation based on non-homogeneous biaxial measurement
Kristóf Havasi, Attila Kossa
DOI: https://doi.org/10.15632/jtam-pl/201313
 

Numerical simulation study on continuous span variable cross-section arched roof
Qing Zhang, Miao Peng, Ji Yao, Yu Zhou, Jianfeng Huang
Journal of Theoretical and Applied Mechanics 2025;63(2):331-348
DOI: https://doi.org/10.15632/jtam-pl/200390
 
ARTICLE
 

Numerical study on micro-fracture characteristics of rock unloading failure under high stresses and the explanation for rock burst
Yuezong Yang, Anye Li
Journal of Theoretical and Applied Mechanics 2025;63(2):263-278
DOI: https://doi.org/10.15632/jtam-pl/199924
 
ARTICLE
 

Tool for analysis of traffic of vertical take-off and landing aircraft in urban agglomerations
Antoni Kopyt, Mateusz Sochacki, Kacper Kaczmarek
Journal of Theoretical and Applied Mechanics 2025;63(1):103-113
DOI: https://doi.org/10.15632/jtam-pl/195717
 
ARTICLE
 

Layered mechanics model for surface movement and deformation due to confined aquifer pumping
Liangliang Zhang, Hua Cheng
Journal of Theoretical and Applied Mechanics 2025;63(1):59-74
DOI: https://doi.org/10.15632/jtam-pl/195695
 
ARTICLE
 

Influence of geometrical defects on aerodynamic drag of non-watertight Ahmed body
Xuelong Liu, Haidong Yuan, Qing Qin, Songze Chen
Journal of Theoretical and Applied Mechanics 2024;62(4):769-786
DOI: https://doi.org/10.15632/jtam-pl/195069
 

Random eigenvibrations of beams with viscoelastic layers
Marcin Kamiński, Maciej Przychodzki, Magdalena Łasecka-Plura, Michał Guminiak, Agnieszka Lenartowicz
Journal of Theoretical and Applied Mechanics 2024;62(4):763-767
DOI: https://doi.org/10.15632/jtam-pl/194242
 

Design Method of Diamond Buckling Restrained Braced Frame Structure Based on Normal Force Balance of Column Joints
Qing ZHANG, Ji YAO
Journal of Theoretical and Applied Mechanics 2024;62(4):855-873
DOI: https://doi.org/10.15632/jtam-pl/194235
 
ARTICLE
 

Asymmetric Duffing oscillator: the birth and build-up of a period-doubling cascade
Jan Kyzioł, Andrzej Okniński
Journal of Theoretical and Applied Mechanics 2024;62(4):713-719
DOI: https://doi.org/10.15632/jtam-pl/193829
 
  • All papers in Journal of Theoretical and Applied Mechanics are published online under the CC BY open access license.
  • Publication of a paper in the Journal is subject to fee. The fee is € 700 for a full length paper and € 350 for a short communication. The fee is due upon acceptance of the paper for publication by the Editorial Board.
Most read
Indexes
 
Keywords index
Topics index
Authors index
eISSN:2543-6309
ISSN:1429-2955
Journals System - logo
Journal of Theoretical and Applied Mechanics
Al. Armii Ludowej 16/650
00-637 Warsaw
Poland
e-mail: jtam@ptmts.org.pl

© 2006-2025 Journal hosting platform by Bentus
Scroll to top