About the Journal
Current issue
Online first
Archive
Instructions for Authors
Reviewers
Archive
1/2018 vol. 56
 
 
ARTICLE
 

Hygrothermoelastic buckling response of composite laminates by using modified shear deformation theory
Masoud Kazemi
Journal of Theoretical and Applied Mechanics 2018;56(1):3–14
DOI: https://doi.org/10.15632/jtam-pl.56.1.3
 
ARTICLE
 

A generalized thermoelastic dual-phase-lagging response of thick beams subjected to harmonically varying heat and pressure
Ashraf M. Zenkour
Journal of Theoretical and Applied Mechanics 2018;56(1):15–30
DOI: https://doi.org/10.15632/jtam-pl.56.1.15
 
ARTICLE
 

Dynamic and resonance response analysis for a turbine blade with varying rotating speed
Dan Wang, Zhifeng Hao, Yushu Chen, Yongxiang Zhang
Journal of Theoretical and Applied Mechanics 2018;56(1):31–42
DOI: https://doi.org/10.15632/jtam-pl.56.1.31
 
ARTICLE
 

Reduced number of design parameters in optimum path synthesis with timing of four-bar linkage
Jacek Buśkiewicz
Journal of Theoretical and Applied Mechanics 2018;56(1):43–55
DOI: https://doi.org/10.15632/jtam-pl.56.1.43
 
ARTICLE
 

Annular rotating disks optimal with respect to mixed creep rupture
Aneta Ustrzycka, Krzysztof Szuwalski
Journal of Theoretical and Applied Mechanics 2018;56(1):57–69
DOI: https://doi.org/10.15632/jtam-pl.56.1.57
 
ARTICLE
 

An analytical study on buckling behavior of CNT/polymer composite plates using first order shear deformation theory
Pramod Kumar Peyyala, Subba Rao V V
Journal of Theoretical and Applied Mechanics 2018;56(1):71–79
DOI: https://doi.org/10.15632/jtam-pl.56.1.71
 
ARTICLE
 

A locally modified single-phase model for analyzing magnetohydrodynamic boundary layer flow and heat transfer of nanofluids over nonlinearly stretching sheet with chemical reaction
Pooria Akbarzadeh
Journal of Theoretical and Applied Mechanics 2018;56(1):81–94
DOI: https://doi.org/10.15632/jtam-pl.56.1.81
 
ARTICLE
 

Bending analysis of plates by superposing of cylindrical deflections
Grzegorz E. Jemielita
Journal of Theoretical and Applied Mechanics 2018;56(1):95–105
DOI: https://doi.org/10.15632/jtam-pl.56.1.95
 
ARTICLE
 

An analytical investigation of 2D-PPMs hollow infinite cylinder under thermo-electro-mechanical (TEM) loadings
Mohsen Meshkini, Keikhosrow Firoozbakhsh, Mohsen Jabbari, Ali SelkGhafari
Journal of Theoretical and Applied Mechanics 2018;56(1):107–122
DOI: https://doi.org/10.15632/jtam-pl.56.1.107
 
ARTICLE
 

A new method for automatic defects detection and diagnosis in rolling element bearings using Wald test
Ammar Chiter, Rabah Zegadi, Rais El'Hadi Bekka, Ahmed Felkaoui
Journal of Theoretical and Applied Mechanics 2018;56(1):123–135
DOI: https://doi.org/10.15632/jtam-pl.56.1.123
 
ARTICLE
 

Modified model for shear stress distribution using TRI-1 Lunar soil simulant
S. Jayalekshmi, Pala Gireesh Kumar
Journal of Theoretical and Applied Mechanics 2018;56(1):137–146
DOI: https://doi.org/10.15632/jtam-pl.56.1.137
 
ARTICLE
 

On axisymmetric heat conduction problem for multilayer graded coated half-space
Dariusz Mariusz Perkowski, Roman Kulchytsky-Zhyhailo, Waldemar Kołodziejczyk
Journal of Theoretical and Applied Mechanics 2018;56(1):147–156
DOI: https://doi.org/10.15632/jtam-pl.56.1.147
 
ARTICLE
 

A prediction method for load distribution in threaded connections
Dongmei Zhang, Shiqiao Gao, Shaohua Niu, Haipeng Liu
Journal of Theoretical and Applied Mechanics 2018;56(1):157–168
DOI: https://doi.org/10.15632/jtam-pl.56.1.157
 
ARTICLE
 

Determination of the internal resistance of a hammer drill chisel
Nikolay Nikolov, Petko Sinapov
Journal of Theoretical and Applied Mechanics 2018;56(1):169–178
DOI: https://doi.org/10.15632/jtam-pl.56.1.169
 
ARTICLE
 

Fatigue crack growth and probability assessment for transverse TIG welded Aluminum alloy 6013-t4
Gunawan Dwi Haryadi, Rando Tungga Dewa, I Made Wicaksana Ekaputra
Journal of Theoretical and Applied Mechanics 2018;56(1):179–190
DOI: https://doi.org/10.15632/jtam-pl.56.1.179
 
ARTICLE
 

Modification of the algorithm for calculating fatigue life for the criteria based on the concept of the critical plane
Krzysztof Kluger, Tadeusz Łagoda
Journal of Theoretical and Applied Mechanics 2018;56(1):191–201
DOI: https://doi.org/10.15632/jtam-pl.56.1.191
 
ARTICLE
 

Steady and unsteady analysis of NACA 0018 airfoil in vertical-axis wind turbine
Krzysztof Rogowski, Martin Otto Laver Hansen, Ryszard Maroński
Journal of Theoretical and Applied Mechanics 2018;56(1):203–212
DOI: https://doi.org/10.15632/jtam-pl.56.1.203
 
ARTICLE
 

Old materials - new capabilities: lattice materials in structural mechanics
Marek Augustyniak
Journal of Theoretical and Applied Mechanics 2018;56(1):213–226
DOI: https://doi.org/10.15632/jtam-pl.56.1.213
 
ARTICLE
 

Polyester sail technical woven fabric behaviour under uniaxial and biaxial tensile tests
Andrzej Ambroziak, Paweł Kłosowski
Journal of Theoretical and Applied Mechanics 2018;56(1):227–238
DOI: https://doi.org/10.15632/jtam-pl.56.1.227
 
ARTICLE
 

Dynamic simulation of a novel "broomstick" human forward fall model and finite element analysis of the radius under the impact force during fall
Dariusz Grzelczyk, Paweł Biesiacki, Jerzy Mrozowski, Jan Awrejcewicz
Journal of Theoretical and Applied Mechanics 2018;56(1):239–253
DOI: https://doi.org/10.15632/jtam-pl.56.1.239
 
ARTICLE
 

Extension of the Hamiltonian approach with general initial conditions
Helio A. Navarro, Livija Cveticanin
Journal of Theoretical and Applied Mechanics 2018;56(1):255–267
DOI: https://doi.org/10.15632/jtam-pl.56.1.255
 
ARTICLE
 

On bifurcation load of a three-member slender system with internal crack subjected to Euler’s load
Sebastian Uzny, Krzysztof Sokół
Journal of Theoretical and Applied Mechanics 2018;56(1):269–281
DOI: https://doi.org/10.15632/jtam-pl.56.1.269
 
ARTICLE
 

Preliminary experimental/numerical study for the vibration annoyance control of a windshield wiper mechanical system through a Synchronized Switch Shunt Resonator (SSSR) technology
Massimo Viscardi, Romeo Di Leo, Monica Ciminello, Marco Brandizzi
Journal of Theoretical and Applied Mechanics 2018;56(1):283–296
DOI: https://doi.org/10.15632/jtam-pl.56.1.283
 
ARTICLE
 

Optimum design of fiber angle and hole orientation of an orthotropic plate
Xiaoli Zhang, Aizhong Lu, Shaojie Wang, Ning Zhang
Journal of Theoretical and Applied Mechanics 2018;56(1):297–311
DOI: https://doi.org/10.15632/jtam-pl.56.1.297
 
ARTICLE
 

Selected examples of referring the examined stochastic technical stability to the ISO standards
Jerzy Kisilowski, Jarosław Zalewski
Journal of Theoretical and Applied Mechanics 2018;56(1):313–321
DOI: https://doi.org/10.15632/jtam-pl.56.1.313
 
COMMUNICATION
 

Modified Split Hopkinson Pressure Bar for the investigations of dynamic behaviour of magnetorheological materials
Leszek J. Frąś, Ryszard B. Pęcherski
Journal of Theoretical and Applied Mechanics 2018;56(1):323–328
DOI: https://doi.org/10.15632/jtam-pl.56.1.323
 
COMMUNICATION
 

Enhanced energy conversion as a result of fluid-solid interaction in micro- and nanoscale
Janusz Badur, Paweł Ziółkowski, Sebastian Kornet, Tomasz Kowalczyk, Kamil Banaś, Mateusz Bryk, Piotr Józef Ziółkowski, Michał Stajnke
Journal of Theoretical and Applied Mechanics 2018;56(1):329–332
DOI: https://doi.org/10.15632/jtam-pl.56.1.329
 
  • Starting from January 1, 2020, the Publisher of Journal of Theoretical and Applied Mechanics introduces a fee for published articles.
  • This applies only to papers submitted after this date and accepted by the Editorial Board for publication.
  • A payment of 500 EUR will be a condition for commencing the editorial procedure for upcoming articles.
Most read
Indexes
 
Keywords index
Topics index
Authors index
eISSN:2543-6309
ISSN:1429-2955
Journal of Theoretical and Applied Mechanics
Al. Armii Ludowej 16/650
00-637 Warsaw
Poland
phone: +48 664 099 345
e-mail: biuro@ptmts.org.pl

© 2006-2023 Journal hosting platform by Bentus